Thu. Sep 21st, 2023

Screw-in tree steps are a simple method to carry the ability to climb an edifice to reach the tree stack. They’re usually lighter alternatives to the climbing stick and are smaller and less bulky in your backpack as well as on your shoulders. Additionally, they are very easy to put up or remove.

 For the sake of completeness to top it off, they’re generally an affordable alternative to other methods for safe climbing a tree, like the use of a ladder or climbing sticks.

 One of the major benefits of the tree step is that it is tailored to the specific needs of the user. The steps can be placed at the exact distance you want to offer a suitable climbing distance to your own size.

These kinds of steps are very useful in terms of dimensions and application. They are also able to be swiftly removed from the tree if you decide to move the location of your hunt.

It is vital to know that it’s not permitted in some states to utilize screws-in steps to climb trees on public property. It is important to check your state’s hunting regulations to determine if they are permitted if you do not hunt on private land. Another option is to trees with steps strapped to them.

 We’ve compiled the best screw-in trees steps from various producers with a range of features and designs. Look over each one, then compare them and read reviews to gain a better comprehension of the strengths and shortcomings of each.

The Screw-In Tree’s List of Steps

  • Cranky Tree steps
  • Ameristep Step-Up Tree Step
  • Cranford Deluxe Ezy Step
  • North Mountain Gear Monster XL
  • Bearclaw Tree Steps
  • Odin Tree Steps

The description of the Screw-In Tree Steps

We have now had the chance to look at the various screw-in tree steps and to get a sense of their main features, we’ll take the time to explore greater detail.

Below is a detailed analysis of each model, including all the features and features that make them stand out when compared to the competition. As you can find, there are plenty of alternatives to choose from within each model or make.

Cranky Tree Methods

They are extremely sturdy tree steps made of aluminum. They are lightweight and easy to carry, put on the tree, and then crank into place using the ratchet wrench supplied.

First of all, the whole kit comes with a belt holster that can be used to easily carry to the desired location.

The best way to determine the step is to put them in the tree, where the sharp edge will cut deeply. Then, you can employ a ratchet wrench to fix the spike securely into the tree’s branch until it is fully screwed in. The fork at the bottom of the step has a tiny spike that will ensure that the step doesn’t move when you walk onto it or hold it when climbing.

Once the step is in place, the square edge on which each step is made can be used as an easy-grip or large boot surface. The ridged surface ensures that there are lots of grips, which reduces the risk of falling.

The whole kit weighs less than 5 pounds. It is has a capacity of 300 lbs and if the steps are correctly placed it allows for a climb of about 16 feet.

Ameristep Step-Up Step-Up Tree Step

The three steps are a basic and simple idea that was intended to offer you an affordable, simple-to-install method of climbing onto your treestand.

The foundation of the Step-Up Tree step is a 2-inch self-tapping screw, which allows the user to fasten it on any tree with a weight-bearing. It does not require tools to put this in the ground.

The step area measures four inches wide which is enough to accommodate any boot-clad feet. The area of the stepping is divided to give the foot more grip.

Each step is $2.99 therefore, should you require eight steps to get to your location this system would cost you $23.92.

The maximum weight capacity for each step is 750lbs.

A Cranford Climb the Deluxe Tree Steps

The Ezy Step climbing systems by Cranford come with a basic L-shaped design that supplies the hunter with an easy way to take well-secure steps up the tree swiftly and quietly.

This model comes in a Deluxe version. It is made with heavy 11 gauge steel which has been hot-forged and is riveted with stainless steel. It is different from the other steps in the Ezy Step collection by having an extra security bubble that is placed at the top of the step to ensure that the foot will not slide off.

Every step is 3.25 inches high and the step’s area is four inches wide. It is connected to the tree with the help of a 1-1/4″ self-tapping screw. Each step weighs 5.7 pounds.

The procedure of installing each stage is easy and involves inserting the entire structure into the tree, then screwing it in place until it is secured.

The steps are available in single steps, as packages of 50 steps or packages of 100.

North Mountain Gear Monster XL Tree Steps

The steps for trees made by North Mountain follow the same basic design that is used in Ameristep steps. Ameristep steps. They are sold in sets of five steps and offer you an easy-to-use climbing system.

The steps are constructed of one piece of steel to ensure they’re sturdy and will support you while you climb up the tree.

The tread is very sharp and is 3 inches in length, meaning it can be sunk into the tree’s trunk. The tread is made knurled to ensure boots don’t slide off. The tread is 5 inches in width, which is enough room for all boots.

The installation process is as easy as inserting the thread that has been sharpened into the tree, and screwing it in till the whole thread has been embedded. It is an issue of reversing the procedure.

The steps are designed to carry weights of up to 300lbs.

Bearclaw Tree Steps

The three steps are constructed of aircraft-grade 6061-T6 aluminum, which is extremely strong and durable.

Each step can be folded for storage purposes when transporting them. They can be folded quickly for use, and then locked in their right-angled location.

To put them into the tree, you just install the anchoring bolts at the locations at which you would like each step to be placed. It is then a Bear Claw is then slipped over the bolt’s head and into position using the smaller collar to ensure that it doesn’t move.

At the back of every step is a cleat that is inserted into trees’ bark, preventing moving from side to side.

Every step is 3.8 grams as do the bolts, which weigh less than 1 an ounce. The bolts for lag are 12mm which can also be used with the previous API steps.

The lag bolts and the steps are available separately, with the steps costing $15.00 for each step and each bolt for a lag costing $2.50. at $17.50 for each step they’re among the most expensive, however, in terms of strength and the quality of construction and design, they’re top of the line.

Odin Tree Steps

Odin Tree Steps Odin Steps for Tree Steps are secure and safe and easy to put in. They are constructed from high-quality materials to ensure that they are robust once they are put installed, so you can trust them to help you get up to your tree stand.

The process of installing the steps involves two steps. The first step is to screw into the mounting bracket, which can be accomplished using the battery drill, hand-driver, or ratchet. After the bracket is in place, simply need to click it into a position where it is anchored tightly and can’t be removed.

If you’d like to get rid of the steps, they can be removed by unclicking them while you move back to the tree.

They are constructed out of hardened plastic. The treads are large and ridged to provide safe footing and avoid slippage. They are also lightweight, and will not add much weight to your backpack while you travel to your tree stand.

Each step is evaluated to be able to carry 300 pounds.

Although they appear like a fantastic product it’s difficult to locate the product. 

No screw-in steps Cause harm to trees?

The harm caused by the screws used to connect screws to the tree could cause little harm to trees. After all, you’re drilling holes into the bark and into weaker, more fragile parts that make up the trees. However, trees are robust and can quickly recuperate from any minor damage.

Like cutting on the branch of a tree. The cut will start to heal and become hard. The tiny holes created by screws won’t be noticeable as the tree grows and heal itself.

When the wood of the plant gets broken, however, it opens the possibility of introducing diseases into the trees. The bark serves as a shield to provide protection against harmful organisms, whether they are microbial or not.

What you should do when you are completed your work, is to get rid of them and the screws. The screws left in place will permit the tree to expand around them, and this could pose a risk to other people, especially those who loggers might strike one with their chainsaw further down the line.

What Happens If My State Forbids the Screw-in Tree Stairs?

Several states across the United States have made it illegal to install screw-in steps on public land for trees. It is, therefore, necessary to find a different method.

If you’re determined to utilize the tree step, would be to opt for the straps-on version of the tree step. They operate like the screw-in model, but they are secured by a strap that can be adjusted and is placed on the tree’s trunk.

The steps for trees do not cut through the tree’s bark However, they can “bite” into it, which means they won’t slide or move after they’ve been put in place.

Remember…Safety First!

Climbing trees is a hazardous sport and a lot of accidents and deaths related to hunting could be the result of falling from trees.

Before leaving the ground, you should always wear the TMA (Treestand Manufacturer’s Association) approved safety harness and be securely connected.

While all the mentioned products are of high quality and safe to use, there’s always the possibility that they weren’t installed properly or the tree is diseased or soft.

If you slip, or the steps detach, you should ensure you have your security line there to prevent your fall.

However high above the ground you go, you must wear your harness and your hands aren’t snagged to be able to hold the steps as you move.

Leave a Reply