Learning how to adjust bow sights up and down is something that should not be taken lightly. Sometimes the damage can be irreversible, especially if the operator does not understand how to do it properly. The mistake you can make is pulling the bow harder than is necessary.
When I first started bow hunting with my father, he did not teach me how to adjust bow sights up and down properly. It took me quite a while to understand what I was doing wrong. I did not believe that I was doing anything wrong. This is probably the biggest reason why I have made mistakes in the past, and I will continue to make them in the future.
Here is a simple explanation of how to adjust bow sights up and down to help you avoid these mistakes and instead learn how to correctly adjust them. If you learn the proper way to do this, you can reduce the number of times you have to use your trigger fingers when you are practicing this skill.
In order to correct the aim of your bow sights, the left side should be on the same plane as the target as you are extending the bow back. The right side should be slightly above the target at the same time as you are lowering the bow. Once you have done this, you should repeat this action to find the right way to do it.
Keep in mind that when you are carrying your bow, your sights are not set in place. You are changing the position of your sights each time you pull the bow back. Try to maintain an even distance between the two sights. To achieve this, always point the left side of your bow as far away from the target as possible before drawing the bow back.
Now, let’s take a look at how to adjust sights up and down. To do this, stand at the center of your target and pull back the bow until the sights are almost straight up. Then, use the left trigger finger to make a slight push on the right sight before bringing the bow back to the ready position.
Make sure that you do not pull the bow too hard when you are adjusting sights up and down. You should allow the sights to drop a little at a time and then continue to let them drop a little before bringing the bow back. This should take the pressure off of your trigger finger.
The best way to practice how to adjust bow sights up and down is by holding the bow in your hands while you are standing at the target. Keeping your sights pointing as high up as possible while pulling the bow back will ensure that you are correctly adjusting them at all times.
Every time you do this, you should change your sights to the correct position for the next shot. For instance, when you are at the ready position, you should change your sights to the right point at the start of the string. At the end of the string, you should check the left point and adjust your sights there.
The goal here is to be able to get your bow sights to always be pointing towards the target. By changing the point of focus on each pull of the bow, you will eventually develop the habit of constantly adjusting them.
By developing this habit, you will eventually become more accurate in how to adjust bow sights up and down. You will be able to enjoy the experience of using your bow without having to worry about accidentally damaging your sights.
This way of learning how to adjust bow sights up and down is much better than holding the bow as if you were aiming it at the target. The only thing that is more frustrating is the constant adjustment of the sights to keep them level. in the correct position every time.
