Sun. Feb 5th, 2023

when to make mock scrapes

Whether you are hunting for deer or trying to change the deer’s movement patterns, making mock scrapes can help. But how do you know when to make them?

We're an affiliate

We hope you love the products we recommend! Just so you know, we may collect a share of sales or other compensation from the links on this page. Thank you if you use our links, we really appreciate it!


Using mock scrapes can be a powerful tool when it comes to patterning deer. However, you need to consider the location of the scrape in relation to the area you are hunting.

The location of the mock scrape should be somewhere deer can easily get to, and should be in an area with good cover. You can place the mock scrapes on the edge of a tree stand, or even in a pinch point between a food and water source.

The location of the mock scrape is a big part of its success. In order to attract a buck, you must get him to the right place at the right time. If you have a mock scrape in an area with heavy cover, you won’t get as many visits as you would if you placed it in an area with more light.

You should also consider the location of the main scrape. This is usually a semi-open pocket in a thicker area of cover. This is the ideal location to draw deer.

The best time to place the mock scrapes is during the pre-rut. This is when bucks start using scrapes. In most places, the pre-rut is around two weeks before the main rut.

It is also a good idea to look for pre-existing scrapes. These can be found in pinch points between cover and food sources, or in areas of open oak ridges. The most important thing to remember is that you can’t just put any old scrape in the same area.

Another important factor to consider is the wind. Deer are less likely to use a scrape that is obstructed by wind. It is also important to pick a location with good cover and not a windy spot.

Scent control procedures

Creating mock scrapes is a great way to attract deer. Deer are naturally attracted to the smell of overturned earth. Using scent lures and scent control techniques can make your mock scrape stand out from the competition.

The main trick is to create a mock scrape that is both visible and effective. Make sure you are aware of the location of the mock scrape before you begin. The best time to construct a mock scrape is midday.

It’s a good idea to wear odor-free clothes and rubber boots. You should also shower with a scent-neutralizing body wash.

A good way to create a mock scrape is to scratch a few scrapes into the ground on your way to the tree stand. You should then freshen the scrapes with a specially blended scent. You can also place scent wafers in the scrapes to mask human scent.

There are many other scent control techniques that you can use when making mock scrapes. You should use total scent control countermeasures including wearing gloves, spraying urine, and spraying scent-eliminating spray. You should also try to avoid touching the scrapes with your bare hands.

There are many things you can do to create a mock scrape that will impress the deer. Aside from the obvious, you should also try to rake away leaf litter. You should also spray down the area with your favorite scent-eliminating spray.

The other novelty is to make a mock scrape that is a lot smaller than it appears to be. This will give deer a chance to see the mock scrape without having to walk too far. The smallest mock scrape is two feet in diameter. It’s also a good idea to make the scrapes slightly open, i.e. not too close to a tree or other brush.

Buck urine attracts deer

Using mock scrapes to attract deer can be a very effective strategy for hunters. Whether you are hunting in the northern states or in the southern states, mock scrapes can be an effective way to get deer into your stand. The key is to find the right location. The best places for mock scrapes are in places where deer are likely to pass by.

You can also make mock scrapes by placing deer scents or urine. Both smells can attract deer during the rut.

The key is to make the mock scrape a visual draw. If a buck can see the mock scrape, it’s more likely to check it out. Deer are curious creatures. They are always checking out lone objects. When they see the mock scrape, they will start to interact with it.

If you want to make a mock scrape, start by choosing a tree that is appropriate for your situation. Make sure the tree isn’t overgrown. Ideally, it should be a tree that is near a good cover. Ideally, the tree should have branches hanging about four to five feet off the ground.

Then, you’ll want to place the mock scrape underneath a stout branch. This will give the buck a place to lick and rub his antlers. It will also be visible to deer for a long distance.

To create a mock scrape, you can use a stick, a piece of wood, or a tree that has been cut down. Make sure the scrape is free of debris and dirt. You should also make the mock scrape on a flat surface.

Some hunters use commercially bottled urine in mock scrapes. They say it works the same way as human urine. But some hunters prefer to use different scents for each part of the mock scrape.

Changing deer movement patterns

Changing deer movement patterns can be as simple as moving a limb or a branch to the right place. It’s a strategy that will get the buck and the doe moving to the same place.

Big whitetails are nomadic creatures, and they are difficult to pin down. They’re attracted to areas with little to no human disturbance. In addition, they leave scent from their nasal glands and preorbital glands.

The best time to hunt deer is early in the morning after a cold front. They’re hungry, and need to consume their calories to survive the winter. You can use a clover plot to attract early winter deer. However, you must keep the plot from being buried in deep snow.

You can also mist deer curiosity scents on vegetation or use a dripper to disperse scent automatically. If you’re using a dripper, you can position the dripper to disperse the scent from a few feet above the deer’s nose.

During daylight hours, whitetail deer have visible signs of running, chewing cud, and pushing vegetation. They’re also prone to leaving a disturbed environment, such as brush and weeds. In addition, they can avoid predators.

Mature whitetail bucks will focus on pre-rut activities. They’ll check out scrapes and rubs, leaving scent from their nasal glands and forehead. They’ll also move toward food sources. The core of their bedding area is 300 to 1,000 acres. These core areas are the thickest areas in the woods. They also have multiple escape routes.

In addition to using a clover plot, you can also attract early winter deer by offering them overhead limbs and exposed soil. You can also use mock scrapes with licking sticks to attract mature whitetail bucks.

Safety precautions

Having a mock scrape on your hunting property can be an effective way to monitor deer. In addition, it can help you suggest potential tree stands and give you more insight into the deer in your area. But before you start mocking, there are a few important safety precautions to take.

First, make sure your mock scrape is located at the right time of year. Deer will typically only scrape in the fall. If you want to get the most out of your mock scrape, plan on constructing it well before the season. You will also need to refresh it every few days.

Next, choose a mock scrape location that is nearby a food source, bedding area, or a major travel corridor. This will ensure that deer come to the site on a regular basis.

You should also take precautions to minimize human scent at the scrape site. For example, a good way to do this is to wear latex gloves.

Also, make sure your mock scrape is close to a tree stand. This will allow you to see deer more easily and take a clear shot. Wearing pre-washed, odor-free clothing will also help.

You should also take a shower to wash away any scent from your body. If you have the time, you may want to spray your mock scrape with a scent-eliminating spray.

Finally, set up a game camera. This will allow you to identify peak activity periods. You can also set it to record HD video and sound. You should use a trail camera about 10 yards away from your mock scrape. You should also place it opposite the mock scrape’s face. You will need to set the delay to one minute.